sumiadiy

My debut in cheesemaking - A protocol

You can take a biologist out of the lab but you can't take the lab out of a biologist. Or so they say.
After experimenting with jams, pickles, cookies, biscuits and biryani, I have now arrived at doorstep of the wonderful world of cheese making. Suffice to say, I am excited. I have been reading around and getting ingredients - Rennet, Calcium Chloride and UHT Milk - ready for the past few weeks and today I finally decided on a protocol for my first non-paneer cheese. All this paneer making this past year has given me the confidence to take it a step further and experiment with other cheeses, let's see where this goes. Here is a protocol I hope to use in the following days. Will keep this blog updated of the outcome.

The Protocol

Fresh rennet cheese from UHT milk (4 L batch)

A. Stock solutions

A1. CaCl₂ stock, 10% w/v

Weigh 10.0 g CaCl₂ (E509). Add to ~80 mL cool bottled (or boiled and cooled) water in a clean glass jar. It’s exothermic, so add slowly while stirring. Make up to 100 mL, mix, and cap. Label “CaCl₂ 10%” with the date. Store at 4 °C (stable for weeks). Working dose: 2.5 mL/L (0.25 g/L, within the label’s 0.2-0.3 g/L range).

A2. Brine, 20% w/v

Dissolve 200 g non-iodized salt in water, up to 1 L final volume. Chill to 10-12 °C. Reusable for several batches if kept covered at 4 °C.

B. Materials

4 L UHT whole milk CaCl₂ stock (A1) Calf rennet (1:10,000), 2 mL Optional: mesophilic culture (per packet) or 2 tbsp live plain yogurt Bottled water (50 mL) Stainless pot, thermometer, long knife or spoon, ladle Perforated steel mould, follower, cheese cloth, tray Kettlebell (8 kg)

C. Sanitation

Boil the cloth, mould, follower, knife and ladle for 5 min, or rinse them with boiling water. Wipe your work surface and wash your hands. Don’t use bleach or detergent residues.

D. Procedure

Step Action Time Temp 1 Pour the milk into the pot and warm gently, stirring ~10 min to 35 °C 2 Add 10 mL CaCl₂ stock (diluted in a little water), stir 1 min 10 min rest 35 °C 3 Optional: add culture or yogurt, stir, rest 30-45 min 32-35 °C 4 Dilute 2 mL rennet in 50 mL cool water, add it immediately, stir up and down for 1 min 35 °C 5 Stop stirring, cover, do not disturb 45-60 min 35 °C 6 Clean break test: insert a clean knife at an angle and lift. The curd should split cleanly and the whey should be clear. If not, wait 10 more min 7 Cut into ~2 cm cubes (vertical cuts, then horizontal), rest 5 min 8 Stir very gently, raising slowly to 38 °C for a firmer cheese 10-15 min 35-38 °C 9 Let the curd settle, ladle into the cloth-lined mould over a tray 10 Drain, fold the cloth over, flip once 2-3 h room temp 11 Optional pressing: follower + ~2 kg (kettlebell on a stable support), flip and re-dress at 30 min 1-2 h 12 Brine in 20% brine, flip halfway 30-60 min 10-12 °C 13 Pat dry, place on a rack in the cave 3-5 days ~12 °C, 85-90% RH

If you skip aging: refrigerate and eat within 5-7 days.

E. Controls and troubleshooting

No clean break at 90 min: the UHT proteins are too damaged. Fallback is to heat to 80 °C, add vinegar, and make paneer. Soft, mushy curd: extend the setting time, or add 2-3 mL more CaCl₂ stock next time. Bitter or rubbery curd: too much CaCl₂ or rennet. Tough, dry cheese: curd cut too small, cooked too long, or pressed too hard. Record for each batch: milk brand and lot, temperature, setting time, yield, and texture. This helps you optimize the next batch.

Closing words

If anyone feels like trying this, put on your lab coats and pull out the precision balance and come join in the adventure.

Until next time, SumiaDIY.